Imodyuli ye-UF yeMembrane ye-10 intshi yePVC yokuFifa kweUltrafit yeMembrane Imodyuli ye-UFc250B Unyango lwaManzi oMlambo oFakelweyo

Imodyuli ye-UF Membrane i-intshi ye-10 ye-intshi ye-PVC yokuFifa kweMembrane Imodyuli ye-UFc250B yoNyango lwaManzi oMlambo

Inkcazelo emfutshane:

Product Overview

I-UFc250B i-capillary hollow fiber inwebu yimathiriyeli yepolymer ephezulu, engayi kuba nalo naluphi na utshintsho lwesigaba. Izinto zePVC eziguquliweyo, ezamkelwa kule mveliso, zinezinga elihle lokungena, iipropathi ezilungileyo zoomatshini, ukuxhathisa okuhle kweekhemikhali kunye nokumelana nongcoliseko. I-MWCO yi-100K Dalton, inwebu ye-ID/OD yi-1.0mm/1.8mm, uhlobo lokucoca lungaphakathi-ngaphandle.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Usetyenziso

Ukuveliswa kwamanzi amaminerali, amanzi emithombo yentaba kunye nolunye ulwelo oluyinyumba.
Ukusela unyango lwamanzi ompompo, amanzi angaphezulu, amanzi omthombo, amanzi omlambo, njl.
Unyango lwangaphambili lweRO.
Ukucocwa, ukusetyenzwa ngokutsha kunye nokusetyenziswa kwakhona kwamanzi amdaka avela kwimizi-mveliso.

UHlelo lokuSebenza

Le mveliso ibonakaliswe ukuba ineziphumo ezingezantsi zokucoca ngokweemeko zenkonzo yemithombo yamanzi eyahlukeneyo:

Isithako	Isiphumo
SS, Amacandelo > 1μm	Inqanaba lokususa ≥ 99%
I-SDI	≤ 3
Iintsholongwane, iintsholongwane	> 4 log
Unxunguphalo	< 0.1NTU
TOC	Ixabiso lokususa: 0-25%

*Idatha engaphezulu ifunyenwe phantsi kwemeko yokuba ukondla ukungcola kwamanzi <15NTU.

Iiparamitha zeMveliso

IiParameters zobuGcisa

Uhlobo lokuHluza	ngaphandle nangaphakathi
Izinto zeMembrane	I-PVC ehlaziyiweyo
MWCO	100K Dalton
Indawo yeMembrane	48m²
Isazisi seMembrane/OD	1.0mm/1.8mm
Imilinganiselo	Φ250mm*1710mm
Ubungakanani bokudibanisa	DN50 Clamping

Idatha yesicelo

Umkhukula waManzi acocekileyo	12,000L/H (0.15MPa, 25℃)
I-Flux eyilwe	35-100L/m2.hr (0.15MPa, 25℃)
Uxinzelelo lokuSebenza olucetywayo	≤ 0.2MPa
Uxinzelelo olukhulu lweTransmembrane	0.2MPa
Ubushushu bokusebenza obuninzi	45℃
PH Uluhlu	Ukusebenza: 4-10; Ukuhlamba: 2-12
Imo yokusebenza	Umqukuqelo-mqukuqelo okanye u-Dead-end

Ukondla IiMfuno zaManzi

Ngaphambi kokutyisa amanzi, isihluzo sokhuseleko <50 μm kufuneka sibekwe ukuthintela ukuvaleka okubangelwa ngamasuntswana amakhulu kumanzi akrwada.

Unxunguphalo	≤ 15NTU
I-oyile kunye neGrisi	≤ 2mg/L
SS	≤ 20mg/L
Iyonke iAyini	≤ 1mg/L
I-Chlorine eNgqongileyo eZisalelayo	≤ 5ppm
COD	Kucetyiswa ≤ 500mg/L

*Isixhobo se-membrane ye-UF yiplastiki ye-polymer ephilayo, akufuneki kubekho naziphi na izinyibilikisi eziphilayo emanzini akrwada.

Iiparamitha zokuSebenza

Uxinzelelo olukhulu lokuhlambela umva	0.2MPa
Ireyithi yokuQhubela umva	100-150L / m².hr
Backwashing Frequency	Njalo kwi-30-60min.
Ukuhlamba Umva Ixesha	30-60s
CEB Frequency	0-4 amaxesha ngosuku
CEB Ixesha	5-10min.
CIP Ukuphindaphinda	Rhoqo kwiinyanga ezi-1-3
Amachiza okuhlamba:
Ukuvala inzala	15ppm iSodium Hypochlorite
Ukuhlamba ungcoliseko lwendalo	I-0.2% ye-Sodium Hypochlorite + 0.1% ye-Sodium Hydroxide
Ukuhlamba Ungcoliseko lwe-Inorganic	1-2% Citric Acid / 0.2% Hydrochloric Acid