Imodyuli ye-UF yeMembrane ye-8 intshi yePVC yoHlulo lweMembrane yeModyuli UFc200BL Unyango lwaManzi ngeMigodi

Inkcazelo emfutshane:

● Iintsinga ezingenanto zohlulwe zibe ngamacandelo ama-3, zisasazwa ngokulinganayo amanzi okuhlambela ngasemva kwicandelo ngalinye, okukhokelela kwisiphumo esingcono sokuhlamba umva;

● I-304 i-stainless steel clamping isakhiwo inika ukunyamezela koxinzelelo oluphezulu, ukukhusela ngokufanelekileyo iinkqubo ezinkulu ze-UF ekuqhekekeni kunye nokuvuza ngenxa yoxinzelelo oluphezulu kunye neempembelelo;

● Ubungakanani bokudibanisa okusemgangathweni, ukufakwa lula;


Iinkcukacha zeMveliso

Iithegi zeMveliso

Product Overview

I-UFc200BL i-capillary hollow fiber inwebu yimathiriyeli yepolymer ephezulu, engayi kuba nalo naluphi na utshintsho lwesigaba. Izinto zePVC eziguquliweyo, ezamkelwa kule mveliso, zinezinga elihle lokungena, iipropathi ezilungileyo zoomatshini, ukuxhathisa okuhle kweekhemikhali kunye nokumelana nongcoliseko. I-MWCO yi-100K Dalton, inwebu ye-ID/OD yi-1.0mm/1.8mm, uhlobo lokucoca lungaphakathi-ngaphandle.

Usetyenziso

  • Ukuveliswa kwamanzi amaminerali, amanzi emithombo yentaba kunye nolunye ulwelo oluyinyumba.
  • Ukusela unyango lwamanzi ompompo, amanzi angaphezulu, amanzi omthombo, amanzi omlambo, njl.
  • Unyango lwangaphambili lweRO.
  • Ukucocwa, ukusetyenzwa ngokutsha kunye nokusetyenziswa kwakhona kwamanzi amdaka avela kwimizi-mveliso.

UHlelo lokuSebenza

Le mveliso ibonakaliswe ukuba ineziphumo ezingezantsi zokucoca ngokweemeko zenkonzo yemithombo yamanzi eyahlukeneyo:

Isithako Isiphumo
SS, Amacandelo > 1μm Inqanaba lokususa ≥ 99%
I-SDI ≤ 3
Iintsholongwane, iintsholongwane > 4 log
Unxunguphalo < 0.1NTU
TOC Ixabiso lokususa: 0-25%

*Idatha engaphezulu ifunyenwe phantsi kwemeko yokuba ukondla ukungcola kwamanzi <15NTU.

Iiparamitha zeMveliso

imveliso-inkcazo1

Iiparamitha zobuGcisa:

Uhlobo lokuHluza ngaphandle nangaphakathi
Izinto zeMembrane I-PVC ehlaziyiweyo
MWCO 100K Dalton
Indawo yeMembrane 34m2
Isazisi seMembrane/OD 1.0mm/1.8mm
Imilinganiselo Φ200mm*1710mm
Ubungakanani bokudibanisa DN50 Clamping

Idatha yesicelo:

Umkhukula waManzi acocekileyo 10,000L/H (0.15MPa, 25℃)
I-Flux eyilwe 35-100L / m2.hr (0.15MPa, 25℃)
Uxinzelelo lokuSebenza olucetywayo ≤ 0.2MPa
Uxinzelelo olukhulu lweTransmembrane 0.2MPa
Ubushushu bokusebenza obuninzi 45℃
PH Uluhlu Ukusebenza: 4-10; Ukuhlamba: 2-12
Imo yokusebenza Umqukuqelo-mqukuqelo okanye u-Dead-end

IiMfuno zokutyisa amanzi:
Ngaphambi kokutyisa amanzi, isihluzo sokhuseleko <50 μm kufuneka sibekwe ukuthintela ukuvaleka okubangelwa ngamasuntswana amakhulu kumanzi akrwada.

Unxunguphalo ≤ 15NTU
I-oyile kunye neGrisi ≤ 2mg/L
SS ≤ 20mg/L
Iyonke iAyini ≤ 1mg/L
I-Chlorine eNgqongileyo eZisalelayo ≤ 5ppm
COD Kucetyiswa ≤ 500mg/L

*Isixhobo se-membrane ye-UF yiplastiki ye-polymer ephilayo, akufuneki kubekho naziphi na izinyibilikisi eziphilayo emanzini akrwada.

Iiparamitha zokuSebenza:

Uxinzelelo olukhulu lokuhlambela umva 0.2MPa
Ireyithi yokuQhubela umva 100-150L / m2.hr
Backwashing Frequency Njalo kwi-30-60min.
Ukuhlamba Umva Ixesha 30-60s
CEB Frequency 0-4 amaxesha ngosuku
CEB Ixesha 5-10min.
CIP Ukuphindaphinda Rhoqo kwiinyanga ezi-1-3
Amachiza okuhlamba:
Ukuvala inzala 15ppm iSodium Hypochlorite
Ukuhlamba ungcoliseko lwendalo I-0.2% ye-Sodium Hypochlorite + 0.1% ye-Sodium Hydroxide
Ukuhlamba Ungcoliseko lwe-Inorganic 1-2% Citric Acid / 0.2% Hydrochloric Acid

Isixhobo seMathiriyeli:

Icandelo Izinto eziphathekayo
Imembrane I-PVC ehlaziyiweyo
Ukutywinwa IiResins ze-Epoxy
Izindlu UPVC

  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi